快3网站

• 2003-09 ~ 2007-07    大连理工大学   大发彩票www官方网     学士
• 2007-09 ~ 2009-12    大连理工大学   大发彩票www官方网     硕士
• 2010-09 ~ 2013-07    奥地利莱奥本大学       博士

• 2013-08 ~ 2013-12    奥地利莱奥本大学  博士后
• 2013-12 ~ 2019-12    快3网站-大发彩票www官方网  讲师
• 2018-08 ~ 2020-07    英国莱斯特大学工程学院  博士后&高级研究员(Senior Research Fellow)
• 2019-12 ~ 至今    快3网站  副教授

• 数值及数据驱动模拟，主要包括：宏观偏析等缺陷、枝晶生长及过程模拟预测；增材制造跨尺度建模；基于机器学习的材料设计及模拟；多物理场/多相耦合数值建模。
• 凝固过程控制，主要包括：磁致冷功能材料制备；大型铸件的均质化控制；复杂结构件的自适应调控。

承担了国家自然基金、两机重大专项子课题、国家重点研发计划子课题以及包括韩国浦项制铁、宝钢、鞍钢、核动力研究院等行业领头企业产学研项目及课题共17项。与英国莱斯特大学、奥地利莱奥本大学、美国爱荷华大学等国外高校和宝钢、中广核、上重、鞍钢、隆基硅等国内行业重点企业有长期合作关系。 担任《Journal of Iron and Steel Research International》、《中国冶金》青年编委、《Frontier in Materials》客座编辑。Int. Heat Mass Trans., J. Mater. Proc. Technol., J. Alloys Comp., Metall. Mater. Trans. A等期刊特约审稿人。

• 2018快3网站 “晨星-优秀青年学者奖励计划”
• 2016年快3网站 “优秀班主任”
• 2014 年上海市“浦江人才”支持计划

• Neng, Ren; J Li*; Chinnapat, Panwisawas; Mingxu, Xia; Hongbiao, Dong; Jianguo, Li; Thermal-solutal-fluid flow of channel segregation during directional solidification of single-crystal nickel-based superalloys, Acta Mater., 2021, 206: 116620
• N Ren, C Panwisawas, J Li*, M Xia, H Dong, J Li, Solute enrichment induced dendritic fragmentation in directional solidification of nickel-based superalloys, Acta Mater., 2021, 117043
• D Tu, J Yan, Y Xie, J Li*, S Feng, M Xia, J Li, AP Leung, Accelerated design for magnetocaloric performance in Mn-Fe-P-Si compounds using machine learning, J. Mater. Sci. & Tech, 2022, 96, 241-247
• Xiaowei Xu, Jun Li*, Zihui Dong , Long Zeng, Zhenming Xu, Jianguo Li， Multiphase modelling of the continuous metallurgical purification process for impurity removing of recycled aluminum, J. Mater. Res. Technol., 2022,18,830-840
• Neng Ren, Jun Li*, Chinnapat Panwisawas, Mingxu Xia, Hongbiao Dong, Jianguo Li, Insight into the sensitivities of freckles in the directional solidification of single-crystal turbine blades, J. Manuf. Proc., 2022, 77, 219–228
• Neng, Ren; J Li*,; Bingqiang, Wang; Long, Zeng; Mingxu, Xia*; Jianguo, Li; Design of variable withdrawal rate for superalloy single-crystal blade fabrication, Materials & Design, 2021.1, 198: 109347.
• FL Ren, J Li*, HH Ge, DX Cai, QD Hu, JG Li, A comprehensive study of layer casting process by a four-phase filling-solidification model, J. Materi. Proc. Tech., 2020,284, 116737
• HH Ge, J Li*, QT Guo, FL Ren, MX Xia, JH Yao, JG Li， Numerical Simulation of A-Segregation Evolution in a 55-Ton Ingot Using Four-Phase Solidification Model, Metall. Mater. Trans. B, 2021， 1-12
• Honghao, Ge; Hanzong, Xu; Jiefeng, Wang; Jun, Li; Jianhua, Yao*; Investigation on composition distribution of dissimilar laser cladding process using a three-phase model, Int. J. Heat Mass Trans., 2021.3, 170: 120975.
• D Cai, J Li*, N Ren, H Dong, J Li, Interaction of MnS inclusion behaviors and macrosegregation during solidification by multi-phase modelling, J. Materi. Proc. Tech., 2021, 117243
• D Tu, J Li*,, R Zhang, Q Hu, J Li, Microstructure evolution, solidification characteristic and magnetocaloric properties of MnFeP0· 5Si0. 5 particles by droplet melting, Intermetallics, 2021, 131, 107102
• N Ren, J Li*, N Bogdan, M Xia, J Li, Simulation of dendritic remelting and fragmentation using coupled cellular automaton and Eulerian multiphase model, Comp. Mater. Sci., 2020, 180, 109714
• L Yang, J Li*, Z Zhou, R Zhang, D Tu, Q Hu, H Dong, J Li, Direct formation of La (Fe, Si) 13 phase with enhanced mechanical property of off-stoichiometric La1. 7Fe11. 6Si1. 4 alloys by directional solidification, Journal of Alloys and Compounds, 2020817, 152694
• RY Zhang, HL Qin, ZN Bi, J Li, S Paul, TL Lee, SY Zhang, J Zhang, Evolution of Lattice Spacing of Gamma Double Prime Precipitates During Aging of Polycrystalline Ni-Base Superalloys: An In Situ Investigation, Metall. Mater. Trans. A, 2020, 51 (2), 574-585
• Yongsheng Fu, Jun Li*, Jianguo Li, Photo-improved hydrogen evolution reaction activity of the Pt/CdS electrocatalyst, Prog. Nat. Sci.: Mater. Int., 2019, 29(4), 379
• J Li, J Li, O Renk, R Pippan, P Ghosh, Effect of Heterophase Interfaces on Microstructure and Crystallographic Texture Evolution During Rolling of Directionally Solidified Ag-Cu Eutectic Alloy, Metall. Mater. Trans. A, 2020, 51 (1), 368-379
• D Cai, F Ren, H Ge, HS Kim, J Li*, J Li, Modelling of Inclusion Effects on Macrosegregation in Solidifying Steel Ingot with a Multi-phase Approach, Metall. Mater. Trans. A, 2019, 50 (3), 1323-1332
• ZN Zhou, H Akamine, J Li*, L Yang, T Higashizono, QD Hu, M Nishida,Tuning martensite transformation behavior and magneto-caloric effect in Ni44Mn36In14Co6 alloy through doping the fifth element Cu, Journal of Alloys and Compounds,2020, 817, 153150
• L Yang, Z Zhou, S Feng, J Li*, J Liu, J Li, Q Hu, J Li, Microstructure and magnetic property of LaFe11. 6Si1. 4 magnetocaloric alloys by a novel short time heat treatment, 2019, Intermetallics 105, 1-5
• H Ge, F Ren, D Cai, J Hao, J. Li*, J G Li, Gradual-cooling solidification approach to alleviate macrosegregation in large steel ingots, J. Mater. Proc. Technol., 2018, 262, 232-238
• LI J.*, WANG J., REN F. L., GE H. H., HU Q. D., XIA M. X., LI J. G., Experimental and numerical simulation study on layer casting method for composition homogeneity on ingot casting, Acta Metall. Sin., 2018, 1, 118-128,
• Y Fu, J Li*, J Li, Metal/semiconductor nanocomposites for photocatalysis: fundamentals, structures, applications and properties, Nanomaterials,2019, 9 (3), 359
• RY Zhang, HL Qin, ZN Bi, J Li, S Paul, TL Lee, B Nenchev, J Zhang, Using Variant Selection to Facilitate Accurate Fitting of γ″ Peaks in Neutron Diffraction, Metall. Mater. Trans. A,2019, 50 (11), 5421-5432
• LI J., Xia M. X., Hu Q. D., Li J. G.*, Solutions in improving homogeneities of heavy ingots, Acta Metall. Sin., 2018, 54 (5), 773-788
• Y Ouyang, M Zhang, J Li, A Yan, J Liu, A high-throughput study of magnetocaloric materials: Gradient solidification applied to La-Fe-Si, 2019, Intermetallics 108, 100-108
• F Ren, H Ge, D Cai, J Li*, Q Hu, M Xia, J G Li，Simulation of Macrosegregation and Shrinkage Cavity in an Al-4.5 Wt Pct Cu Ingot Using a Four-Phase Model, Metall. Mater. Trans. A, 2018 49 (12), 6243–6254
• Q. Hu, Z. Zhou, L. Yang, Y. Huang, J. Li*, J. G. Li, On the Driving Forces of Magnetically Induced Martensitic Transformation in Directionally Solidified Polycrystalline Ni-Mn-In Meta-Magnetic Shape Memory Alloy with Structural Anisotropy, Metall. Mater. Trans. A, 2017, 48(11), 5480–5491
• Z. N. Zhou, L. Yang, R. C. Li, J. Li*, Q. D. Hu, J. G. Li, Martensite transformation, mechanical properties and shape memory effects of Ni-Mn-In-Mg shape memory alloys, Prog. Nat. Sci.: Mater. Int., 2018, 1, 60-65,
• H. Ge, F. Ren, J. Li*, Q. Hu, M. Xia, J. G. Li, Modelling of ingot size effects on macrosegregation in steel castings, J. Mater. Proc. Technol., 2018, 252,362-369
• Mingqin Xu, Lu Wang, Wenquan Lu, Long Zeng, Hari-Babu Nadendla, Yun Wang, Jun Li, Qiaodan Hu, Mingxu Xia, Jianguo Li, The Nucleation Potency of In Situ-Formed Oxides in Liquid Iron, Metall. Mater. Trans. A,2018, 49 (5), 1762-1769
• Liu J., Li J., Hage F.S., Li J.*, Ramasse Q., Schumacher P., Correlative characterization on microstructure evolution of Ni-based K403 alloy during thermal exposure, Acta Mater., 2017, 131, 169-186
• ZN Zhou, L. Yang, RC Li, J. Li*, QD Hu, JG Li, Martensitic transformations and kinetics in Ni-Mn-In-Mg shape memory alloys, Intermetallics, 2018, 92, 49-54
• Yang L., Zhou Z., Qian J., Ge X. Li J.*, Hu Q., Li J. G., Peritectic Solidification Path of the La(Fe,Si)13 Phase in Dual-Phase Directionally Solidified La-Fe-Si Magnetocaloric Alloys, Metall. Mater. Trans. A, 2017, 48(9), 4229-4236
• Ren F.L., Wang J.G., Ge H.H., Li J.*, Xia M.X., Li J.G., A Homogeneous Billet Layer Casting Fabrication Method, Metall. Mater. Trans. A, 2017, 48 (10), 4453-4457
• Ge H., Ren F., Li J.*, Han X., Xia M., Li J. G., Four-Phase Dendritic Model for the Prediction of Macrosegregation, Shrinkage Cavity, and Porosity in a 55-Ton Ingot, Metall. Mater. Trans. A, 2017,48(3),1139-1150
• Zhou Z. N., Yang L., Wang J. G., Jin T., Huang Y., Li J. *, Hu Q., Li J. G., Internal friction behaviors of ni-mn-in magnetic shape memory alloy with two-step structural transformation, Prog. Nat. Sci.: Mater. Int., 2017, 27(3), 356
• Fu Y. S., Zhang W., Xu X., Li J. *, Li J., Xia M., J. G. Li, A novel heat treatment process for surface hardening of steel: metal melt surface hardening, Metall. Mater. Trans. A, 2017, 48(9), 3975-3979.
• YW Luan, CH Li, D. Zhang, J. Li, XJ Han*, JG Li, Plastic deformation mechanisms and size effect of Cu 50 Zr 50/Cu amorphous/crystalline nanolaminate: A molecular dynamics study, Comp. Mater. Sci., 2017, 129, 137-146
• Hu Q., Yang L., Zhou Z., Huang Y., Li J.*, Li J. G. Orientation relationship between magnetic domains and twins in Ni52Fe17Ga27Co4, magnetic shape memory alloy, Metall. Mater. Trans. A, 2017, 48(6), 2675-2681.
• Li J., Ge H., Wu M.*, Ludwig A., Li J. G., A columnar & non-globular equiaxed mixed three-phase model based on thermosolutal convection and grain movement, Acta Metall. Sin. 2016, 52(9), 1096-1104
• Ge H., Li J.*, Han X., Xia M., Li J. G., Dendritic model for macrosegregation prediction of large scale castings, J. Mater. Proc. Technol., 2016, 227,308-317